Brand: GOOUT SPRINGHILL
Product Name: Sphere House MID TC Inflatable Tent
Specification:
* Model: M210-4237-GOSH
* Tent Fabric: 210g TC Cotton
* Roof Cover: 210D Oxford Fabric + TPU
* Air Columns: TPU Composite Inflatable Air Columns
* Waterproof Rating: PU2000mm (with top cover installed)
* Expanded Size: 410 × 350 × 220 cm
* Packed Size: 82 × 37 × 43.5 cm
* Weight: Approx. 19.2 kg (including accessories)
Color Options:
* Black
* Army Green
Included Accessories:
* Tent ×1
* TPU Roof Cover ×1
* Side Door Fabric ×1
* Wind Ropes ×8
* Reinforced Aluminum Ground Pegs (18cm) ×14
* Manual High-Pressure Pump ×1
* Carry Bag ×1
⸻
Structure Features
* Top Smoke Vent ×1
* Front & Rear Doors ×2
* Side Doors ×2
* Left & Right Viewing Windows ×2
* Left & Right Ventilation Windows ×4
* Side Smoke Vent ×1
* TC Cotton Fabric
* TPU Roof Cover
* TPU Composite Inflatable Air Columns
* PE Composite Explosion-Proof Reinforcement Fabric
* Oxford Snow Skirt (Inside & Outside)
⸻
Inner Tent (Optional Accessory)
* Material: 190T Polyester
* Size: 260–340 × 210 × 150–168 cm
* Weight: Approx. 2.2 kg
⸻
Manual High-Pressure Pump
* Material: PP + PE
* Size: 22 × 10 × 54 cm
* Weight: 0.99 kg
Suitable For:
* Inflatable Tents
* Inflatable Boats / Rafts
* Air Mattresses
* Water Toys
* Inflatable Cushions & Sofas
⸻
Setup Steps
Step 1 – Lay Out the Tent
* Spread the tent flat.
* Ensure the pressure relief valve is fully closed.
Step 2 – Inflate
* Connect the pump to the inflation valve.
* Inflate for approximately 2–3 minutes.
* Recommended pressure: 7–8 PSI.
Step 3 – Secure the Tent
* Position the tent on level ground.
* Insert ground pegs into the designated anchor points.
Step 4 – Install the Roof Cover
* Place the TPU roof cover over the tent.
* Secure using Velcro attachment points.
* Fasten all 8 roof-cover ropes to the corresponding buckles.
Measurement Tolerance: Manual measurement may vary by 3–5 mm. Actual product shall prevail.
.png?w=1250&h=1250)